AUDIOBAR contains a set of buttons meant for quick tuning for audio charateristics. If you need more tools and also want to see the exact effect of your changes in the audio frequency spectrum, you must open AUDIO WINDOW.
When clicked, buttons normally toggle/rotate allowed values. In addition to changing values by clicking you can also move mouse cursor over any button and scroll with mouse wheel (or use left/right arrow keys).
AUDIOBAR is always visible when Jaguar is active and it contains the following buttons:
(( WAV 8 | WAV 16 | WAV 32 )) or (( WAV 10 | WAV 20 | WAV 40 ))
AUDIO OUTPUT SAMPLING RATE - Select the sampling rate for the audio output: 8 / 16 / 32 kHz when the 1.6-MHz bandwidth is in use, or 10 / 20 / 40 kHz when the 2-MHz bandwidth is in use. There is no "best" sampling rate, users' preferences vary. More about this in AUDIO help.
(( CR OFF | CR xx ))
CLICK REMOVER - Toggle the Click Remover ON and OFF, or change the active ON level by scrolling between Low (CR LOW) <> Average (CR AVG) <> High (CR HIGH). More about this in CR and APPLETS > WAVE help.
(( NOTCH ON | NOTCH OFF))
The NOTCH BUTTON enables/disables Jaguar's AUTONOTCH. Jaguar also offers max 20 MANUAL NOTCHES, they must be triggered in AUDIO WINDOW. See NOTCH help for more details about the AUTONOTCH funtion.
(( AGC ON | AGC OFF | AGC OFF+ ))
AGC (Automatic Gain Control) - Rotate the AGC mode by left-clicking the mouse: AGC ON > AGC OFF > AGC OFF+. Scrolling will change the gain coherent to the desired value and will set the mode to OFF (i.e. to the manual gain control). More about automatic gain control in AGC help.
(( LSB | USB ))
SSB – Toggle between the Lower Sideband (LSB) and Upper Sideband (USB). Not availabe if "AM MODE" filter is selected.
(( LOWER FULLSCREEN ARROW ))
Triggers full text screen (TURTLE / TOMCAT) - no need to move mouse to the top area.
(( AUDIO ))
AUDIO WINDOW - opens / closes advanced audio tools.
(( LOWER SPLIT SCREEN ARROW ))
Triggers partial text screen (TURTLE / TOMCAT) - no need to move mouse to the top area.
(( STOCK | JAZZ | CALLIOPE | AM MODE ))
FILTER – Select the filter to be used: STOCK > JAZZ > CALLIOPE > AM MODE. Full range of filters is available only in JAGUAR PRO, in JAGUAL LITE the only available filter is STOCK. More info in FILTERS help.
(( NORMAL | STEEP ))
NORMAL | STEEP – STEEP = "Power filter" mode. NORMAL mode allows some audio frequencies to leak in from outside the offset/bandwidth range. STEEP mode creates a "brickwall" eliminating those frequencies as can be seen in AUDIO WINDOW. Sometimes you'll get better output from weak signals using the STEEP filter mode.
(( BW x.x ))
BANDWIDTH – Select the filter bandwidth in the range of 1.0 to 8.0 kHz in the steps of 0.1 kHz. Available only in JAGUAR PRO, in JAGUAR LITE the only available filter bandwidth is 3.0kHz.
(( OFF x.x ))
OFFSET – Select the filter offset from DC (defaulted to 0.3 kHz). Available only in JAGUAR PRO, in JAGUAR LITE the only available filter offset is 0.3kHz.
(( PRESETS ))
More information in PRESETS help.