ALT-L can be used to rotate/change
currently active log profile. LOGPROFILE can be changed also in LOGBOX.
Creating LOG PROFILES:
User can have max 3 LOGPROFILEs, each must be named in [CUSTOM] section with
LOGPROFILE-parameter.
LOGPROFILE is also identified by number 1-3. For each profile user can give
independent customized logging output format (LOGMODE1 -> LOGMODE3),
clipname format (CLIPNAME1 -> CLIPNAME3), clip folder location (CLIPFOLDER1
-> CLIPFOLDER3) and MWLI logging location (LOCATION1 -> LOCATION3).
Below there's an example where user has three rx locations and wants to control
loggings/clips to based on current rx location. In this example logging output
format and clip name format is kept the same (except the rx location string
embedded in the logging/clip name) but in reality both these formats can be
different in all profiles. Valid customization parameters for LOGMODE and
CLIPNAME are described in CUSTOM.
[CUSTOM] LOGPROFILE1=A-QTH LOGPROFILE2=B-QTH LOGPROFILE3=REMOTE-QTH LOGMODE1=#FREQ;#OFFS;#HHHH#MINS-;#DDDD/#MMMM/#YYYY;#ZONE;#ITUC; ;#NAME-#COMM;#SINP;A-QTH LOGMODE2=#FREQ;#OFFS;#HHHH#MINS-;#DDDD/#MMMM/#YYYY;#ZONE;#ITUC; ;#NAME-#COMM;#SINP;B-QTH LOGMODE3=#FREQ;#OFFS;#HHHH#MINS-;#DDDD/#MMMM/#YYYY;#ZONE;#ITUC; ;#NAME-#COMM;#SINP;REMOTE-QTH CLIPNAME1=#FREQ #NAME #TIME #DATE A-QTH.WAV CLIPNAME2=#FREQ #NAME #TIME #DATE B-QTH.WAV CLIPNAME3=#FREQ #NAME #TIME #DATE REMOTE-QTH.WAV CLIPFOLDER1=F:\Radio Clips\A-QTH CLIPFOLDER2=F:\Radio Clips\B-QTH CLIPFOLDER3=F:\Radio Clips\REMOTE-QTH EMAIL=danny.dxer@gmail.com LOCATION1=AAA, A-QTH, 68.6388, 25.5985, 123 LOCATION2=BBB, B-QTH, 60,1998,24.3367, 456 LOCATION3=CCC, REMOTE-QTH, 67.9761, 28.9254, 789