SCOPE offers a handy tool to monitor the signal power on all MW frequencies at the same time either in LIVE mode or in any ARCHIVE file. SCOPE can be also used for a direct jump to any desired frequency.
JAGUAR LITE supports only one SCOPE (on the bottom, "BOTTOM SCOPE"). User can define if he/she wants to monitor MW10 or MW9 frequencies.
JAGUAR PRO users have also the 2nd SCOPE ("TOP SCOPE") available. Using this "twin scope" system, user can monitor MW10 frequencies on the other SCOPE and MW9 frequencies on the other SCOPE at the same time.
In addition, JAGUAR PRO users can define the twin SCOPE system so that while being in ARCHIVE mode, the BOTTOM SCOPE can show the MW10 dial (or MW9 dial) of the current ARCHIVE file, but at the same time the TOP SCOPE can monitor the MW10 dial (or MW9 dial) of the LIVE mode. This mode is called LIVE PEEKER: for example when user waits for the cx raising on a DXpedition, he/she can concentrate in ARCHIVE file studies but still monitor the LIVE situation on the TOP SCOPE without jumping between ARCHIVE <> LIVE all the time.
KEY = S (by default)
(( BOTTOM SCOPE ))
You can use keyboard key S to open/close the bottom SCOPE. You can also reserve S key for other use (see CUSTOM help), if so you can open/close the bottom SCOPE only by clicking TOOLBAR > SCOPE. When the bottom SCOPE is active, TOOLBAR > SCOPE icon is red.
User can toggle between MW9 <> MW10 dial by clicking the "9 / 10 ball" on the left edge of the SCOPE.
User can jump to any SCOPE frequency by clicking the corresponding bar.
User can increase/decrease the size of the SCOPE window by moving the mouse cursor over SCOPE area and scrolling with the mouse wheel.
Note that SCOPE uses a "quick'n dirty" MW analysis and there can be frequencies without signal power (bar) shown even if the frequency itself is open. These kind of situations happens if there is a strong powerhouse on the nearby frequency (normally 1kHz apart).
JAGUAR PRO ONLY
(( TOP SCOPE ))
You can use TOP BAR button on the SLIDER to open/close the top SCOPE: click/scroll the button until you see SCOPE BAR displayed. MW9 <> MW10 toggling and the jump support is the same as in the BOTTOM SCOPE. If the SCOPE window size is increased/decreased, the changed size is applied to both TOP and BOTTOM SCOPE windows.
If you are listening to ARCHIVE file and you also have LIVE connection active, you'll see "LIVEPEEK" text grayed at the right edge of the TOP SCOPE. If you click that LIVEPEEK, the color turns red and now the TOP SCOPE monitors LIVE situation instead of ARCHIVE. You can close the LIVEPEEK mode by clicking the X at that same spot.