INFOBOX

The INFOBOX window is always shown after a new install, or a full reset, or every time when the "i" (info) key is pressed. You can define that INFOBOX be displayed every time JAGUAR is started for a given time period (see the SETTINGS help).

INFOBOX shows several setup details described below. You can study/change your setup/environment by clicking on the corresponding button on the right.

• VERSION: JAGUAR version and level (PRO or LITE) and the build date.
• PLAYBACK: the name of the currently-playing file.
• FILE INFO: the date, sampling rate, centre frequency, attenuation level, and length of the currently-playing file.
• FILE POOL: the number of files in the file pool and their service status. Certain JAGUAR functions require the use of the JAGUAR file name format. If all the files in the file pool have the correct format, the message "All services available" will be displayed.
• DATABASE: the currently-active station database.
• HARDWARE: the timestamp showing when the hardware connection was created.
• WORKSET: the currently-active WORKSET name, sampling rate, centre frequency, attenuation level and the antenna (for new recordings).
• REC QTH: the currently-active QTH (location) with today's sunrise and sunset times (in UTC).
• REC DISK: the primary and overflow disk details. Currently active recording disk is brightened.
• IDENTITY: Your JAGUAR key for this PC, the SETTINGS button and your "JAGUAR signature".

When you want upgrade JAGUAR from LITE to PRO, you must copy the 8-digit key shown after "KEY", and send it to the JAGUAR support team.

HOW TO

KEY = I

You can open/close INFOBOX by pressing the "I" key or clicking TOOLBAR > INFO > INFOBOX. The gray buttons on the right edge of INFOBOX can be used for the following:

• VERSION - MORE: Copyright information.
• PLAYBACK - MORE: Recording QTH and the sunrise/sunset times on the day when the recording was made.
• FILE INFO - MORE: The exact file size of the PLAYBACK file (or "Writing in progress" in the LIVE mode).
• FILE POOL - OPEN: Open a new ARCHIVE file for playback.
• DATABASE - CHANGE: Change TURTLE database version.
• HARDWARE - LIVE: Connect to LIVE (or jump from ARCHIVE to LIVE).
• WORKSET - Activate some other WORKSET (a popup menu is triggered with a list of available WORKSETs).
• REC QTH - Open WORKSET setting window for changes.
• REC DISK - Change the current recording disk between the two shown disks. If the Perseus connection has been activated, the change will become effective after the next breakpoint.
• IDENTITY - EXIT: Close INFOBOX.