      JAGUAR KIT V2.0 - small but powerful

JAGUAR KIT is a tiny independent Perseus recorder with many additional built in features. These additional features include

* overflow disk control
* support for the battery operated setups (sleep control)
* overnight MW status image
* antenna switch control
* support for two Perseus hardware on one PC 
* trigger for automatic recording when the KIT detects good MW CX 
* support for 24x7 operation (with recovery after Windows Updates)

In addition, Jaguar Pro users can enjoy about

* detailed MW status logs (YAS logs) 
* full spectrum history for all/selected MW frequencies (LIVESCAN)  
* up-to-date MW status log image uploaded to the Internet   

JAGUAR KIT is the successor to the popular MESTOR software, however the KIT is designed for MW DX use only - SW is not supported - and it supports only two sampling rates (1.6 MHz and 2 Mhz). JAGUAR KIT is ideal for MW DXers who appreciate a lightweight and stable solution for their overnight Perseus recordings or have an unattended remote setup running 24x7.

JAGUAR KIT requires that the Perseus drivers have been installed but it does not need/use the Perseus software or the Jaguar software. The KIT itself is portable (no Windows registry used).

JAGUAR KIT is freeware. 

73 / IPA
Ilpo Parviainen
Jaguar Project

**********************************************************

STANDARD DISCLAIMER

The software is provided to the user "as is". Jaguar team takes no responsibility for any damage, which may occur as a result of using JAGUAR KIT. User support is available only for Jaguar Pro users. 

***********************************************************

THE FIRST RUN

Open SETTINGS and fill the required setup data in the settings and then just let the KIT do the job.

The minimum required data:
 
* SETTINGS > RECORDING: Recording disk ("REC_DISK1") 
* SETTINGS > RECORDING: QTH, latitude, longitude ("LOCATION") 
* SETTINGS > MESTOR: At least one scheduler entry ("MESTOR") 
 
When you modify the MESTOR entries, you'll see the corresponding schedule that matches your selection(s) on the left side.

Full documentation can be found on http://jaguars.kapsi.fi/KIT.htm
